Setting up a Brick Paver Walkway or Hanger Bricks

The use of Bricks or Pavers to develop a pathway or patio matches a home in a method that is unequaled. In addition, setting up a Brick or Paver pathway does not always require a pro.

The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. In addition, string lines should be strung on each side of the pathway.
Once the location has been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equal the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the ready area. These strips will act as your walkway border and assistance to preserve the stability and shape of the sidewalk. You can get these plastic strip borders at a lot of house enhancement shops. The strips need to be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

You can then begin to lay the bricks/pavers when this is done. There are numerous patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help keep the integrity of the walkway.

When constructing the sidewalk, inevitably bricks/pavers get more info will require to be cut or divided. Unless you wish to purchase or lease a costly wetsaw, I would suggest purchasing a basic brick/paver splitter. It is essentially a sculpt with a wide end that is the width of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you desire to break the brick. Utilizing a hammer strike the butt end of the chisel strongly. You may require to do this a couple of times. You may also wish to flip the brick/paver over and strike the other side of the brick using the hammer and chisle. Within one or 2 strikes the brick/paver must break cleanly. If your sidewalk has curves you will require to buy/rent a wetsaw.

After setting up the bricks, build up the outdoors edges with extra sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the new pathway and sweep into the fractures. Repeat this procedure a number of times to ensure the cracks are fully filled. This will complete the interlocking of the bricks and help to eliminate any weed growth. Simply include turf seed to the outdoors edges and you must have a beautiful entrance to your house within a couple of weeks.


In addition, setting up a Brick or Paver walkway does not always need a pro. The key to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. Now here that you have a stable base, put a 1" pipe or journal board the length of the sidewalk on either side of the walkway. These strips will act as your sidewalk border and assistance to keep the integrity and shape of the walkway. Undoubtedly bricks/pavers will require to be cut or split when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *